A grade in GIA’s Color Grading System…. at the end of the “Very Light Yellow” category.
A brilliant cut fancy shape that has a square shape with the corners cut off. It might have a step cut or a scissor cut on the crown and a brilliant faceting style on the pavilion.
Radioactive luminous material first used on the hands of watches around 1913. This material was subsequently replaced by Tritium around 1950.
The case or model number of a watch, usually engraved between the lugs, and/or inside/outside the case back.
The bouncing back of light when it strikes an external or internal facet on a polished diamond.
The change in direction of a ray of light as it passes obliquely from a medium of one optical density to a medium of a different optical density, as from air into water or from air into a gemstone. This means that the light bends as it enters a diamond because the light travels through air and the diamond at different speeds.
A process using a refractometer to measure the speed and angle of light entering a gemstone. Very important for gem identification.
Term used to describe the subsidiary ‘extra-function’ dials positioned on the face of a chronograph watch.
A facetted piece of glass or quartz that has a foil backing in order to imitate a diamond.
Rhodium is metal that is part of the platinum family. White gold is commonly rhodium plated in order to give it a very white finished color because white gold is not purely white but instead has a yellowish tint It is also used on silver to prevent it from oxidizing.
A Rolex term used to describe the case metal mixture of stainless steel and platinum, trade-marked on May 21, 1932. This configuration is currently seen on the Rolex Yacht-Master.
A Rolex term used to describe the case metal mixture of stainless steel and gold, trademarked on April 1, 1933.
See also California Dial.
An early style of cutting that is thought to have originated in India and to have been brought to Europe by the Venetians. In its most usual form, it has a flat, unfaceted base and a somewhat dome-shaped top that is covered with a varied number of triangular facets and terminates in a point. The rose cut diamonds are very seldom used today but may be seen in antique pieces.
Often used on sports watches like divers’ or aviator models, it is used to perform an additional function, such as checking decompression times, or telling the time in different time-zones – See also Bi-Directional Rotating Bezel and Uni-Directional Rotating Bezel.
The oscillating weight used in an automatic movement.
In gemology, this refers to the raw, natural state in which gems are found, before they are cut.
When a diamond outer shape is formed in the cutting process it is done by grinding one diamond against another. This should leave the surface of the girdle with a smooth and waxy luster. If a diamond is rounded up too quickly in the fashioning process it will leave it grainy or pitted. It may also be accompanied by numerous hair like fractures extending into the stone, which is called a bearded or fuzzy girdle.
Round Brilliant Cut
This is the most common cut for a diamond. The standard round brilliant “full cut” diamond consists of a total of 58 facets: 1 table, 8 bezel facets, 8 star facets and 16 upper-girdle facets on the crown; and 8 pavilion facets, 16 lower-girdle facets, and usually a culet on the pavilion.
Rounding Up or Girdling
The step in the fashioning process of a diamond in which the stone is given its overall shape. The stone is held in a lathe, or cutting machine, and another diamond, called a sharp, which is affixed to the end of a long dop that is supported by the hands and under an armpit, is brought to bear against the stone behind shaped. An older method consisted merely of rubbing two diamonds together until the desired shape was obtained.
Used to refer to the red variety of tourmaline, including the color range from pink to red. More of a marketing than a gemological term; these days gemologists tend to use simply “red tourmaline.”
Needle-like inclusions (or foreign matter) within stones. These can produce some gem phenomena as an asterism (star) or cat’s eye (chatoyancy.)